Fabricator Bellow Type High Damping Front or Rear Strut Kit (75559) by Air Lift®. This is a set of two air spring assist bags mounted over shock absorbers on strut assemblies - complete with related components to allow a vehicle fabricator to install them on a unique, customized vehicle suspension design. Included are upper mounting brackets, sleeves, adapter tubes, swivel elbow fittings, and related hardware. The kits are available in multiple weight support ratings and welding is required for installation.

For the automotive customizer who’s building a vehicle with a customized, low riding suspension system, Air Lift’s Fabricator Shocks give you all the components you need to add the versatility and performance-enhancing benefits that air suspension assist provides. The kits are available in multiple configurations to suit a variety of load needs, and they include upper mounting brackets, sleeves, adapter tubes, swivel elbow fittings, and all related hardware for easy custom installation. Fabricator Shocks eliminate the coil spring and feature a shock absorber mounted within an air bag that provides an infinitely variable spring rate.

Both components are mounted atop a McPherson strut type assembly, making the Fabricator Shocks adaptable to virtually any modern vehicle. Fabricator Shocks also provide up to 1,000 pounds of boost to lift suspensions faster and offset the weight of added performance equipment. By providing a customizer the ability to achieve low-to-the ground looks and handling advantages at lower spring inflations along with height clearance, comfort, and load leveling ability at higher spring inflations, these kits truly provide the best of both worlds without disadvantages.

• (2) 1/4" FNPT X 1/2" Fitting (Part Number 21873)
• (2) Adjuster Knob
• (2) Braided Air Line (Part Number 20002)
• (2) Gasket
• (2) Med. Duty Retaining Ring (WS-150) (Part Number 10777)
• (2) Nyloc Nut (Part Number 18015)
• (2) O-Ring
• (2) Rebound Washer (Part Number 10983)
• (2) Tube - Strut Adapter (Part Number 35026-001 )
• (2) Tube - Strut Adapter (Part Number 35026-001)
• (2) Tube, Adapter (Part Number 35262-001)
• (2) Tube, Inner Adapter (Part Number 35262-004)
• (2) Union, 1/4FNPT X 1/4PTC "DOT" (Part Number 21810)
• (2) Union, 1/4FNPT X 3/8PTC "DOT" (Part Number 21987)
• (2) Univ. Bellow over Strut - Hi Damp (Part Number 35219)
• (2) Universal Bellow over Strut - Long (Part Number 35320)
• (2) Universal Bellow over Strut - Short (Part Number 35325)
• (2) Upper Bracket - Strut (Part Number 07269)
• (4) Bolt
• (4) Tab - Spindle Mounting (Part Number 35368-002 )
• (4) Tab - Spindle Mounting (Part Number 35368-002)
• (4) Thrust Bearing - Strut (Part Number 10850A)
• (8) 3/8" Flat Washer (Part Number 18444)
• (8) 3/8" X 1.25" Stud (Part Number 17292)
• (8) 3/8"-16 Nyloc Nut (Part Number 18435)
• (8) 5/16" Flat Washer (Part Number 18433)
• (8) 5/16" X 1" Stud (Part Number 17282)
• (8) 5/16"-18 Nyloc Nut (Part Number 18438)