Summer sale discount 30%! Shop now!
My Cart

Mini Cart

BORLA AXLE-BACK EXHAUST ATAK® FOR 2015-2019 CHEVROLET C7 CORVETTE ZO6/ GRAND SPORT
2484.99
$2,484.99
  • Horsepower and Torque Increased by 7 – 10%
  • Increased exhaust flow for better performance
  • Better fuel economy at cruising speeds
  • The most aggressive sound of any Borla system
  • Custom designed for each application
  • Patented straight-through, multi-core muffler design reduces backpressure while absorbing sound waves
  • Mandrel-bent stainless steel tubes with diameters optimized for reduced restriction while maintaining exhaust gas speed
  • Made from the finest austenitic stainless steel for long-lasting durability
  • All welded construction
  • Includes everything required for installation, including detailed instructions
  • Backed by the exclusive Borla Million-Mile warranty
  • Proudly made in the USA 
- +
Availability:50 In stock
SKU 11903CB
Details

Borla ATAK Axle-Back Exhaust System for 2015-2019 Chevrolet Corvette (C7) Z06 6.2L V8 Automatic/ Manual Transmission/ 2017-2019 Grand Sport 6.2L V8 Manual Tranmission ONLY Rear Wheel Drive 2 Door WITHOUT AFM With NPP Dual Mode Exhaust. (11903CB)

BORLA® ATAK® (Acoustically Tuned Applied Kinetics) technology is designed for high-performance purists who prefer exhaust sound over their stereos.  ATAK®-equipped exhaust systems deliver the highest available dB (decibel) levels in the BORLA® street-legal lineup... and unlike inferior brands that lose significant sound quality at higher volumes, ATAK® is tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output.

ATAK® technology is based on specifically-tuned attributes of the internal muffler cores, which are calibrated on a vehicle-by-vehicle basis to deliver the most desirable sound. For more details and to hear the difference, watch our ATAK® videos below for different make and model vehicles.? The power of BORLA® Multicore® technology, with the sound of vehicle-specific acoustic tuning!

Upgrading your factory exhaust system to a Borla stainless steel performance exhaust system with a more efficient and less restrictive design can improve sound (adding more enjoyment driving your vehicle) and increase engine horsepower and torque throughout the RPM range (allowing quicker acceleration to pass a vehicle or get to highway speeds quicker). Borla offers Axle Back exhaust systems, Cat back exhaust systems, and for select Competition-Use-Only vehicles, we offer long tube headers to replace your exhaust manifold for the best performance and sound.

A Borla "Axle Back" or rear section exhaust implies the exhaust system is located behind the vehicle rear axle . Most installations are completed in less than an hour and require no cutting of the factory system. A Borla Axle Back performance exhaust is a less restrictive aftermarket exhaust system that will improve the sound level both inside the cabin and exterior. Borla Axle Back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year/make/model vehicle. Improvements in sound and performance are accomplished by using a superior straight-through muffler design, mandrel-bent tubing, and the application of proper engine-matched tubing diameter. In some vehicles Borla offers multiple sound levels (Touring, S-Type, and ATAK®) to suite the individual driver's taste in vehicle sound. Borla also offers the Cat Back exhaust system which is located behind the factory catalytic converter.

Borla Axle Back systems replace the factory rear mufflers and exhaust pipe with an improvement in overall sound & performance to your truck, SUV, or car. Welded tips are standard on most systems running gas or diesel fuels. Some of today's modern vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the vehicle rear axle. A Borla Axle Back performance exhaust system replaces the factory exhaust system (behind this service-point) following the same exhaust path and secured using the original vehicle hangers and rubber isolators.

Vehicles that don't have a factory service-point require “cutting" the factory exhaust system before installing a Borla Axle Back performance exhaust system. Borla includes cutting instructions and hardware to complete the installation. Borla pioneered the use of aircraft grade 304 stainless steel tubing, a material with higher content of carbon & nickel that won't rust or corrode for automotive exhaust aftermarket.

Features:

  • Horsepower and Torque Increased by 7 – 10%
  • Increased exhaust flow for better performance
  • Better fuel economy at cruising speeds
  • The most aggressive sound of any Borla system
  • Custom designed for each application
  • Patented straight-through, multi-core muffler design reduces backpressure while absorbing sound waves
  • Mandrel-bent stainless steel tubes with diameters optimized for reduced restriction while maintaining exhaust gas speed
  • Made from the finest austenitic stainless steel for long-lasting durability
  • All welded construction
  • Includes everything required for installation, including detailed instructions
  • Backed by the exclusive Borla Million-Mile warranty
  • Proudly made in the USA 
More Information
More Information
BrandBorla Exhaust
360 Degree Thumbnail/b/o/borla-11903cb.jpg
3D Thumbnail/b/o/borla-11903cb.jpg
Reviews
Product Question


DELIVERY & RETURNS

We always aim to please!
 
FREE SHIPPING

Free shipping on all US order or order above $200

 
EMAIL SUPPORT 24/7

Contact us 24 hours a day, 7 days a week!

 
14 DAYS RETURN

Simply return it within 14 days for a refund if you are not happy.

 
100% PAYMENT SECURE

We ensure secure payment with top-class encryption!

Contact Us