OEM steel endlinks are small, flimsy and can fail if a larger rear swaybar is installed. OEM endlinks are week and will flex greatly after installing a stiffer aftermarket swaybar. This flexing makes your stiffer aftermarket swaybar feel less responsive. PERRIN polyurethane endlinks are made with stiff polyurethane bushings pressed into 6061T6 aluminum arms to provide a solid connection between your swaybar and chassis. This translates into a more predictable and better handling car.

ERRIN Sway bar endlinks are machined from solid 6061T6 aluminum and use our custom polyurethane bushings. The low profile design of PERRIN endlinks allow for ample clearance for even the largest diameter sway bars. Polyurethane bushings are a great alternative to someone wanting the race car type part, without the added maintenance or harshness of a Spherical bearing type endlinks.

PERRIN endlinks feature 95a durometer custom made polyurethane bushings. We choose a stiff 95a durometer material to provide a feel similar to a solid spherical bearing endlink but without the harshness or noise that can be associated with them after years of use. Polyurethane is extremely durable, nearly maintenance free and less expensive then bearing type endlinks.

PERRIN polyurethane bushing endlinks were designed for those living in climates where your vehicle is commonly exposed to corrosive elements. The combination of aluminum, polyurethane, and yellow zinc plated hardware make PERRIN performance endlinks very weather resistant and unaffected by wet climates and road salt. PERRIN endlinks include high quality Grade 8 bolts and other hardware ensuring that you will not have a failure while driving around the track.

PERRIN Endlinks take roughly 1 hour to install and only require that you lift the car onto jack stands for clearance.

Features:

• Direct Replacement for OEM Parts
• 6061T6 Aluminum Construction
• Polyurethane Bushings
• Weather Resistant
• Includes Grade 8 Hardware

Fitment:

• Subaru WRX STI (All Models) 04-07